|
SONEX® Valueline Panels Technical Specifications
Physical Data — willtec®
| Material |
Open-cell melamine-based foam |
| Density |
0.5 to 0.7 lbs./cubic ft. (ASTM D3574-77) |
| Long Term Service Temperature |
302 degrees F |
| Fire Resistance |
Class 1 per ASTM E 84 (all finishes)
Meets UL 1715 (willtec natural) |
| Flame Spread per ASTM E 84 |
Natural: 5
colortec™: 5
Painted: 10
Hypalon® coated: 25 |
| Smoke Density per ASTM E 84 |
Natural: 50
colortec: 90
Painted: 10
Hypalon coated: 65 |
| Microbial Growth |
Passes UL 181, section 11 |
| Fungus Resistance |
Rating #0 per ASTM G21 |
| Toxicity |
Passes University of Pittsburgh Toxicity of Smoke Emission test |
| Finishes |
Natural White or Grey, colortec, painted or Hypalon coated* |
| NOTE: *20-box order minimum required for Hypalon coating |
Sound Absorption
| Finish |
Thickness |
Coefficients per ASTM C423-90a
|
| |
|
125Hz
|
250Hz
|
500Hz
|
1KHz
|
2KHz
|
4KHz
|
NRC
|
Mounting
Type
|
| Natural White or Grey |
1-1/2"
1-7/8"
2-1/2" |
0.08
0.17
0.19 |
0.29
0.55
.062 |
0.73
1.07
1.15 |
0.94
1.15
1.21 |
0.97
1.08
1.14 |
0.89
1.10
1.20 |
0.75
0.95B
1.05 |
B
B
B |
| Painted (Charcoal, Beige, Brown, Blue, and Light Gray) |
1-1/2"
1-7/8"
2-1/2" |
0.06
0.19
0.20 |
0.34
0.55
0.66 |
0.79
1.17
1.20 |
1.02
1.21
1.19 |
1.00
1.15
1.12 |
0.98
1.13
1.12 |
0.80
1.00
1.05 |
B
B
B |
Installation Information
- Make sure both the panels and the surface to which the panels are being applied are free of and dirt. If adhering to a metal surface, use a degreaser.
- Apply a line of adhesive around the perimeter of the panel approximately 1" from the edge.
- Apply a line of adhesive from opposite corners through the center of the panel, creating an "X".
- Press panel into place and hold for 5 seconds. Then pull panel away to allow adhesive to become tacky. Lastly, press the panel back into position and hold again for 5 seconds.
- Wear clean cotton/canvas gloves for installation.
- Use a sharp razor or fixed blade knife and a metal straight edge cut panels. For best results, cut panels on flat side.
- Overhead installations may require additional adhesive and mechanical support to ensure a strong enough bond.
pinta acoustic's distributors and architectural representatives are available to assist you with technical questions, product applications, and pricing. Please visit the distributor/rep locator link on the left side of this page to be put in contact with the representative nearest you.
To find out more about SONEX Valueline Panels, explore the "Related Links" and "Ralated Downloads" area, located on the right side of this page.
|
