|
PHONSTOP™ Ceiling and Wall Tiles
Technical Specifications
Material
- Made from 100 percent recycled glass; sintered to form rigid, lightweight and porous sound absorbers
- Class 1(A) fire-rated ASTM E84
- PHONSTOP pt17 Primer
- PHONSTOP pa81 Adhesive for concrete, masonry and drywall surfaces
- PHONSTOP pa85 Acoustic Plaster for seamless, monolithic appearance
- PHONSTOP pt13 Sealer for weather exposed conditions
- Can be custom colored for interior applications using an acoustical coating, such as ProCoustic* from ProCoat Products, Inc.
- Non-fibrous, lightweight and durable, the panels are simple to saw, drill, sand, etc.
Size
PHONSTOP V—adhesive applications on walls and ceilings, interior or exterior
- 24" x 24" x 2" thickness (610 x 610 x 50 mm)
- 24" x 48" x 2" thickness (610 x 1220 x 50 mm)
- Depending on the desired look, panels offer two edge options. One face of the panels features 3/8" (9 mm) chamfer beveled edges, while the reverse face has square edges
PHONSTOP E—suspended ceiling applications using pinta or standard 15/16" grid system, interior or exterior
- 24" x 24" x 1" thickness nominal (604 x 604 x 25 mm)
- Slightly beveled square edge, lay-in ceiling tiles
Installation
PHONSTOP V
- Adheres directly to structurally sound, relatively smooth, clean, dry and level wall or ceiling surfaces using PHONSTOP pt17 Primer rolled on to the existing substrate. Apply PHONSTOP pa81 Adhesive using 3/8" tooth trowel to the back of each tile. Be careful not to get any adhesive on the exposed tile faces.
- To create a seamless, monolithic appearance on walls and ceilings use the basic materials mentioned above; be sure to orient the square edge tile faces toward the exposed side. Once completed, roll on an additional layer of PHONSTOP pt17 Primer before troweling with two coats of PHONSTOP pa85 Plaster to finish.
- Tiles can be custom colored using an acoustical coating, such as ProCoustic* from ProCoat Product, Inc.
- In outdoor, weather exposed conditions apply PHONSTOP pt13 Sealer over the panels’ permeable finished surfaces for additional durability.
PHONSTOP E
- Lay-in pinta or any standard 15/16" ceiling grid system, interior or exterior
Physical Data — PHONSTOP Ceiling and Wall Tiles
| Material |
100% recycled glass, sintered |
| Density (ASTM D1622-08) |
16.79 lbs./ft3 |
| Fire Resistance (ASTM E 84) |
Class 1(A) |
| Flame Spread |
0 |
| Smoke Density |
0 |
Compression Strength
(ASTM D1621-04) |
165 psi |
Thermal Resistance
(ASTM C518-04) |
Effective R value 3.24 |
Sound Absorption
PHONSTOP V
| PHONSTOP V—Test ASTM C423-90a; Mounting Type A |
| Description |
Frequency (Hz) |
| 125 |
250 |
500 |
1,000 |
2,000 |
4,000 |
NRC |
Thickness 2" (50 mm),
adhered and coated ———— |
0.14 |
0.60 |
1.09 |
0.96 |
1.02 |
1.03 |
0.90 |
| Thickness 2" (50 mm), adhered without space between tiles ———— |
0.16 |
0.63 |
1.15 |
0.91 |
0.98 |
0.99 |
0.90 |
Thickness 2" (50 mm),
adhered and plastered — — — — |
0.26 |
0.75 |
0.86 |
0.62 |
0.66 |
.057 |
0.70 |
PHONSTOP E
| PHONSTOP E—Test ASTM C423-90a; Mounting Type A |
| Description |
Frequency (Hz) |
| 125 |
250 |
500 |
1,000 |
2,000 |
4,000 |
NRC |
| Thickness 1" (25 mm) ———— |
0.45 |
0.55 |
0.60 |
0.75 |
0.80 |
0.85 |
0.70 |
* For further acoustical coating information, visit www.procoat.com.
|
